Check out our sponsor
limited quantities available. We are slowly opening back up and adding items
Welcome to the Tulsa Arcades Online Store
Tulsa Arcades DIY Pre Built Arcade Kit 4 to 8 weeks FREE Freight Shipping
$1,350.00
$1,000.00
Only a few left!
FREE USA FREIGHT SHIPPING WITH LIFT GATE INCLUDED
New style cab now being offered.
Tulsa Arcades Midsize cabinet is made out of 3/4 Melamine. This is thicker then an Arcade1up. You don't have to put this cabinet together the shell is prebuilt and shipped freight. The only thing you have to do is install your electronics , t mold & graphics and attach the control panel.
Kit is constructed using dado joints. NO Janky camlocks or cheap wood screws Like are competitor kits and no split side panels attached with brackets which is required to keep from shipping freight. No riser required. Best off all you don't have to unpack and build everything like you do with a flat pack kit with a pre built shell.
This is a quality shell built to last see photos of cabinet with clamps we use over 20 clamps per cab. This type of construction is not found in flat pack builds or other kits. This is something that will last!
USA Freight shipping fully insured with liftgate service is included in the total price you pay.
Dimensions :
Control Panel 29.3419 x 10.6542
Side Panels 22.779 x 63.5606 add 2 inches with the leveling feet in height
Cab width roughly 23" wide
Kit includes the following :
Control panel with 8 buttons per player
Marquee Plexyglass
Bezel 24"
Bezel Plexyglass
Leveling Feet
T-mold color choice
Lock
Monitor mount
Mounting hardware hinges, screws,
Marquee brackets
Pre built empty shell with t mold groove
Recommend Tools & items for completion
Mallet for t- mold installation
Screw driver for attaching monitor & control panel hinges & Arcade leveling feet.
Adjustable wrench for attaching lock to back door.
Graphic knife for graphic install.
Led Strip for marquee
Speakers Z313 is what we use and mount them in using brackets and hot glue
Speaker covers 4"
What's not included :
electronics
monitor
buttons
Joysticks
Speakers
Computer unless ordered
Graphics unless ordered
Additional options
Coin door cut
Coin door
Graphics
Please Allow 6 to 8 weeks for delivery
Goonies Arcade Cabinet FREE Pickup Or Pay Freight
$2,900.00
$2,600.00
Shipping not Included in pricing. FREE pickup or buyer must pay freight charges our Fedex freight service is around $300 to $450 which includes full insurance coverage. Your welcome to use another service dimensions are listed below
Fresh Arcade Build. This Arcade is built using Dado construction NO janky camlocks or furniture fasteners. High quality construction Cnc cut and made in house .
This Goonies arcade has over 5,000 games. Custom Goonies theme frontend / OS with sound track music from Goonies in menu. This is a custom arcade you won't find anywhere else made by Tulsa Arcades. If you want something else we can build you almost any arcade and have different pricing options. This Goonies Arcade is decked out!
Arcade features :
1080p 24" LCD Monitor
Speakers & Subwoofer
4 To 8 Way Joystick Survos allowing you to quickly switch joystick controls for different games.
Led underglow kit
Lit Goonies Marquee
Lit Metal Coin Door
Yellow Led Buttons
Gold Trim
i5 Computer with 8GB of Ram & SSD drive.
Leveling Arcade Feet
Lockable back door
Material / Wood Thickness .75 3/4 melamine
Dimensions :
Control Panel 29.3419 x 10.6542
Side Panels 22.779 x 63.5606 add 2 inches with the leveling feet in height
Cab width roughly 23" wide
Tulsa Arcades Midsize Upright Arcade NEW PRICING
$1,699.00 - $2,160.00
NEW upright offering now pictured in the first photo.
We recommend you call for local ordering ( 918 ) 960-1223
NOW Shipping.
Standard USA freight now offered. Every arcade shipped comes with $3500 insurance free.
About our upright :
Tulsa Arcades upright arcade is built like a tank no camlocks or janky connectors, Dado construction and glued. Each side panel is a solid part. There's no riser this is almost a full size Arcade. It's almost 65" tall.
This is a Tulsa Arcades Upright Arcade design you won't find anywhere else everything is made in house built to last. Don't settle for an upright with cam locks and poor construction get something that will last with solid construction and solid parts.
New Revisions : Lockable back door no hinges
Budget Build :
1080p Monitor
lit marque
led buttons
speakers & subwoofer
64gb image with lower powerful mini pc
Leveling Feet
Hinged control panel with storage access
Slim design feels like a full size arcade but compact
Removable bezel for easy cleaning
Recessed panels
Budget differences
No back door open back
Graphics on control panel & marquee. No wrap black cab other then this
Smaller storage
Very basic
$1999 Features Include
24" HD Monitor
Lit Marquee with no bleed design.
Leveling Feet arcade stays off the ground so graphics don't get damaged
Hinged control panel with storage access
Slim design feels like a full size arcade but compact
Removable bezel for easy cleaning
Lockable Back Door like old-school no hinge
Recessed panels
lit coin door
128gb image with higher end pc
Graphic Wrap : two sides , controller, kick plate , lit marquee , bezel What's not included top panel & speakers
$2160 build
24" HD Monitor
Lit Marquee with no bleed design.
Leveling Feet arcade stays off the ground so graphics don't get damaged
Hinged control panel with storage access
Slim design feels like a full size arcade but compact
Removable bezel for easy cleaning
Lockable Back Door like old-school no hinge
Recessed panels
256gb image with higher end mini pc
Graphic Wrap : two sides , controller, kick plate , lit marquee , bezel, filler , speakers , top
Pre designed options :
Multicade
Hellraiser
Stranger Things
Ms Pac Man / Galaga anniversary
Back To The Future
Tiger Strike
DC Vs Marvel
Simpsons
Ready Player One
Street Fighter 3
Ghostbusters
Metal Slug
Dead Pool
The Walking Dead
Teenage Mutant Ninja Turtles
Suicide Squad
Batman
Mortal Kombat
Dragon Lair
Available options
PC
Coin Door
Cooling Fans
Led Light Package
Custom Graphics
Upgraded Computer
Please allow up to 4 weeks for a custom built order. There's no refunds uprights are made to order. Once your order goes in we start your build process.
Call us if you have any questions before purchasing. You can also do local ordering
Arcade1up After Market 19 or 20 inch Full Kit Completed 2 to 5 weeks
$96.99 - $119.98
Only a few left!
Back order status - Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order with graphics installed your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times.
This kit does not work with Big Buck Hunter
https://www.tulsaarcades.com/store/p237/BigBuckMonitorUpgrade.html#/
Completed Kit Includes
Monitor Mount + Hardware
Bezel 19" or 20" which ever you select
Black Screws
Plexiglass
Additional Options
Graphic
Install
For install instruction video CLICK HERE
NO Refunds or exchanges on graphics. Bezel graphics are not installed unless you select installation, Bezel graphics can be a pain to install and are easy to mess up.
Product install videos :
Product coverage :
https://www.youtube.com/watch?v=BCP6Thlu4U0
https://www.youtube.com/watch?v=8RWlVtHLIlA
https://www.youtube.com/watch?v=c3ba7ir2JXk
https://www.youtube.com/watch?v=ijN4sOQRBiA
https://www.youtube.com/watch?v=D3JbHOPP4uw&t=686s
https://www.youtube.com/watch?v=8etra3cExpQ
https://www.youtube.com/watch?v=e7OzfCcRxcM
If you select graphics most of the graphic at the bottom will be under the control panel
Refunds & Damage Claims
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping & handling cost is non refundable.
No refunds or replacements on graphics.
Damage claims **** Please Read ****:
If you don't select shipping insurance and your item arrives damaged, It must be turned into the USPS inspection department for claim processing before a replacement is issued, This could take up to 30 days! We pack all items well but damage can happen from the lack of care through the postal service.
If you select shipping insurance you still need to turn the items in but instead of waiting for the claim to be settled we will send you a replacement after proof of return shipping.
Arcade PC 8GB Mod Kit NO Cancellations offered
$299.00
$199.00
PC Features :
i5
8GB of Ram
1TB Hard drive included unless you select SSD then you get 500GB SSD
New thermal paste applied to CPU
PC is reconditioned used but bench tested and cleaned.
PC Pictured will vary but you will get a machine with the listed specs :
PC - come's pre configured for standard Easyget Arcade buttons , X box controller or keyboard. You will need to configure other controls or if you have your buttons mapped differently.
PC is powerful enough to play dreamcast & games that you can't run on the pi 4 or android boxes. Also the OS is more user friendly then pi 4. OS is batocera. It's the latest stable update , also additional themes and bezels have been downloaded. The image size is roughly 250gb
Is there a game list ? NO please do not ask you will be more then happy with what's included this has almost everything you could want.
This PC will play NFL blitz , killer instinct 1 & 2 which the pi can't. Everything is ready to go.
What's included with the base PC
Power Cord
Tower
NO HDMI , DVI , Or Display cables or keyboards
NO Monitor even with 20" upgrade monitor upgrade kit
What else will I need ?
Display cable to hdmi if your using an hdmi monitor
Additional options :
SSD upgrade . We recommend an SSD drive for best performance and long lifespan. mechanical hard drives drives fail and don't last as long. If you select 1TB drive you will also be getting a used drive and get slower performance.
20" monitor upgrade kit. - Bundle & Save. If you select this mod and get a PC you will now save on a 20" monitor upgrade kit.
Control panel - 16 button total , 2 player controls with Tulsa Arcades generic graphic pre installed. Buttons are pre wired and configured for your pc, At this time we can not offer custom graphics due to back order. Panel will work with gen 1, 2 , should work with marvel however you will have a small gap in the back between the monitor & control panel. This panel will not work with Legacy line, Killer instinct
Questions -
When can I expect this to ship ?
There's a lot involved with this kit if you select the additional options.
If you select the PC only you can expect shipping in 5 days to 4 weeks but if you add the controller and monitor upgrade kit you could be looking at 2 to 8 weeks.
As of now we are telling everyone expect 8 weeks. We are currently in the process of moving our shop and trying to clear it out before the end of May.
Do you offer cancelations?
NO due to rising cost of materials , labor shortages , most everything is ordered based off counts. If you place your order we do not offer a cancellation. Be sure that you want to purchase this prior to buying we will not refund your order.
Tech Support Offered?
30 days basic tech support is offered on setup. We do not config track balls , spinners or flight sticks or digital marquees however this PC build is very easy to configure.
Warranty ?
Since the PC is used we do not warranty it. However if you select the SSD there's a 1 year manufacture warranty since the drive is brand new. You will need go through the manufacture or send the drive in and let us go through the manufacture for you.
Arcade PC i3 or i5 4GB Mod Kit options
$134.00 - $179.99
Only a few left!
PC Features :
i3
4GB of Ram
500gb to 1tb Hard drive included drive unless you select other options below
***** New thermal paste applied to CPU. *****
PC is reconditioned used but bench tested and cleaned.
PC Pictured will vary but you will get a machine with the listed specs :
PC - come's pre configured for standard Easyget Arcade buttons , X box controller or keyboard. You will need to configure other controls or if you have your buttons mapped differently.
PC is powerful enough to play dreamcast & games that you can't run on the pi 4 or android boxes. Also the OS is more user friendly then pi 4. OS is batocera. It's the latest stable update , also additional themes and bezels have been downloaded. The image size is roughly 200gb +
Is there a game list ? NO please do not ask you will be more then happy with what's included this has almost everything you could want.
This PC will play NFL blitz , killer instinct 1 & 2 which the pi can't. Everything is ready to go.
What's included with the base PC
Power Cord
Tower
NO HDMI , DVI , Or Display cables or keyboards
NO Monitor even with 20" upgrade monitor upgrade kit
What else will I need ?
Display cable to hdmi if your using an hdmi monitor
Additional options :
SSD upgrade . We recommend an SSD drive for best performance and long lifespan. mechanical hard drives drives fail and don't last as long. If you select 1TB drive you will also be getting a used drive and get slower performance.
20" monitor upgrade kit. - Bundle & Save. If you select this mod and get a PC you will now save on a 20" monitor upgrade kit.
Control panel - 16 button total , 2 player controls with Tulsa Arcades generic graphic pre installed. Buttons are pre wired and configured for your pc, At this time we can not offer custom graphics due to back order. Panel will work with gen 1, 2 , should work with marvel however you will have a small gap in the back between the monitor & control panel. This panel will not work with Legacy line, Killer instinct
Questions -
When can I expect this to ship ?
There's a lot involved with this kit if you select the additional options.
If you select the PC only you can expect shipping in 5 days to 4 weeks but if you add the controller and monitor upgrade kit you could be looking at 2 to 8 weeks.
As of now we are telling everyone expect 8 weeks. We are currently in the process of moving our shop and trying to clear it out before the end of May.
Do you offer cancelations?
NO due to rising cost of materials , labor shortages , most everything is ordered based off counts. If you place your order we do not offer a cancellation. Be sure that you want to purchase this prior to buying we will not refund your order.
Tech Support Offered?
30 days basic tech support is offered on setup. We do not config track balls , spinners or flight sticks or digital marquees however this PC build is very easy to configure.
Warranty ?
Since the PC is used we do not warranty it. However if you select the SSD there's a 1 year manufacture warranty since the drive is brand new. You will need go through the manufacture or send the drive in and let us go through the manufacture for you.
We test your pc for several hours to insure that you get a good working PC. We also clean each PC & we apply NEW thermal paste to each CPU. This is something most vendors won't do.
Batocera Hard Drive
$49.99 - $112.99
NO CANCELLATIONS offered
Drive manufactures will vary drives are tested and used unless you select the new SSD. Hard drives are 3.5
Plug and play just install into your pc and configure your buttons and usb hardware. You will need a keyboard, mouse for first setup.
Easy setup and more friendly then Pi 4
200GB + image on hard drive of choice.
Pi 4 Image
$0.00
$55.99
Only a few left!
Tweaked image updated ready to go for the pi. 4 Allow up to 2 weeks for processing
Things you will need
Keyboard
Pi 4
Arcade buttons & encoders
Arcade1up Tron S Panel video Screen Mod NO CANCELLATIONS OFFERED ** BackOrdered**
$69.99
Only a few left!
*** READ ** If you want this delivered faster don't select graphic install
Tulsa Arcades is in the process of moving, We are now backordering anything ordered .
If you place an order with graphic install you could arrive as late as May into June, Bezel kits and other items that don't have graphics installed should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
NO CANCELLATIONS OFFERED,
If you want this delivered faster don't select graphic install
Be sure to check out our Tron Lit Riser
https://www.tulsaarcades.com/store/p402/troncabriser.html#/
Due to our overwhelming amount of orders we are only taking limited batches on items. We are only offering 5. Once sold out restocking will happen in 2 weeks
************* READ CAREFULLY*************
We are not offering Cancellations so once your order goes in it's final! Please do not order if you don't agree to this.
************* READ CAREFULLY*************
About this product
Panel is made on 1/2 MDF, Come's with the graphics and panel. If you want the graphics installed, you will need to pay extra!
What's included.
- Half inch board with screen cut
- Graphics for panel, laminated on 3M not installed
- 4 wood screws
You will need to remove your old S panel from cab, this can easily be done without taking the entire cab apart. Loosen bolts & remove one side for the monitor brackets.
Where do I buy the screen at?
Screen can be purchased here:
Terminator Lit Riser Front Panel Backordered No Cancellations Offered
$122.00
$98.99
Sold out
Backorder Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this backorder status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately.
Once we get moved we look to being able to improve shipping times so hopefully we can deliver way before this backordered advertised date this is more to cover us.
NO CANCELLATIONS OFFERED
We are short staff and going forward we will be limiting the number of orders since the demand is exceeding what we are able to handle.
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic. Red -t mold will be installed
This is a front panel replacement only not the entire riser.
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Product Coverage :
https://www.youtube.com/watch?v=mzKYv3Oc9Qg&t=1s
https://www.youtube.com/watch?v=KuWpohEb19Y
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 40% restocking fee for any returned merchandise. You have 7 days from the delivery date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
Arcade1up kick plate graphic T2 Graphic 2 week shipping
$0.00
$34.99
Sold out
We are slowly opening back up. We are offering limited stock on products. We only have 4 of these up for purchase currently
This graphic will only work for the Arcade1up T2 Kick Plate
No returns or refunds or exchanges on graphics
Arcade1up T2 Coin Door Panel Kit BackOrdered
$120.00
$99.00
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times.
NO CANCELLATIONS OFFERED
No cutting required. With our T2 coin door panel kit you can quickly install a REAL coin door into your T2 Arcade1up Cabinet.
Kit includes
.25" black panel with coin door cutout
1 .50" support bar pre drilled holes with 4 wood screws
1 .50" coin door support ring.
***No metal coin door included. You will need to order this from x arcade ***
Additional Options
Graphics
Graphic install
Metal X Arcade door not included
SHIPPING
Doors will be shipped out via Fedex or UPS and insured for $100 standard policy. Should your door arrive damage you will get a replacement part after Fedex or UPS closes it's claim in about 2 to 4 weeks then another week for cutting replacement.
We suggest you select Tulsa Arcades House Insurance. This will get you a replacement part faster without having to wait for Fedex or UPS to close it's claim.
Lately carriers have been really reckless. This is not required and if you order you will have insurance from our standard shipping included and your order will be covered.
We are not offering returns on this due to it's size
Tron Lit Riser 15" Bigger Size fits tron cab only Backordered
$122.00
$105.99
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times.
NO CANCELLATIONS OFFERED
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
This is a front panel replacement only not the entire riser. comes with black t mold installed
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Product Coverage :
https://www.youtube.com/watch?v=mzKYv3Oc9Qg&t=1s
https://www.youtube.com/watch?v=KuWpohEb19Y
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 40% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
Arcade1up Completed Lit Riser Front Panel Backordered
$122.00
$86.99 - $88.99
Nice clean look, No visible screws other then factory screws used to attach riser front to the riser. Pictures shown at top are of actual product not photoshop render images at the bottom are past designs from some of the DIY risers we have printed.
Inside section includes t mold choice as well as the outside section.
MK Riser does not work with legacy cab
This is just the front panel not an entire riser replacement, Orders are made to order we don't offer cancelations on lit risers
If you want a cheaper option select our DIY Lit riser. Only $65.99
https://www.tulsaarcades.com/store/p24/arcade1uplitriserDIY.html#/
No led light strip is included. You can use any led strip we recommend the ones linked that don't bend at the edges. The ones that bend are not ideal and likely to die
Instructions
- Remove the front riser panel and set aside screws.
- Install Black Out Panel. Screws included.
- Install LED Lights.
Product Video Coverage :
https://www.youtube.com/watch?v=KuWpohEb19Y
https://www.youtube.com/watch?v=uexZEXjlS74&t=1s
https://www.youtube.com/watch?v=Xq1L4gq6-oQ&t=680s
https://www.youtube.com/watch?v=5WsmXWApAhg
https://www.youtube.com/watch?v=-wQx77jkgpE
https://www.youtube.com/watch?v=tuWRc53MAK8&t=2s
https://www.instagram.com/p/CJIAEBsnbGb/
Product photo links :
https://www.instagram.com/p/CEckokKHRgc/
https://www.instagram.com/p/CBhRV8bniFH/
https://www.instagram.com/p/CBZHL_KjG6p/
https://www.instagram.com/p/CKtpZKzH6Ht/
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 30% restocking fee for any returned merchandise. You have 14 days from delivery date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
Star Wars Lit Riser 15" Bigger Size fits Star Wars cab Backordered
$122.00
$99.99
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times.
NO CANCELLATIONS OFFERED
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
This is a front panel replacement only not the entire riser. comes with black t mold installed
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Product Coverage :
https://www.youtube.com/watch?v=mzKYv3Oc9Qg&t=1s
https://www.youtube.com/watch?v=KuWpohEb19Y
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 40% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
Arcade1up After Market 19 or 20 " Monitor Upgrade Kit a la carte options
$27.99 - $35.99
Backorder status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
e, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this backorder status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times in the future.
NO CANCELLATIONS OFFERED
This is our a la carte option. If you want the entire kit please use this link.
https://www.tulsaarcades.com/store/p250/MonitorUpgradeKitCompleted.html.html#/
This kit does not work with Big Buck Hunter
https://www.tulsaarcades.com/store/p237/BigBuckMonitorUpgrade.html#/
Description
With our kit you are not stuck with a bezel that has a monitor built into the bezel frame. If your monitor ever dies you can easily swap your monitor out without having to buy an entire monitor upgrade kit again.
We built this kit to free you from the restrictions of having a smaller screen and the easy of replacement. With a Monitor built into the frame of your bezel you are stuck looking for a replacement that you won't find in the USA that has to fit into that bezel.
You will find most aftermarket cheap monitors are what we call bulk buys, washed out colors and prone to dying so even though these can be purchased new we recommend you free yourself of this hassle most of these panels are on par with the quality of gen 1 arcade1up factory monitors and won't last as long.
The Dell ultrasharp monitors are older but the panels exceed these bulk buy panels and the picture quality is way better then Arcade1up or any new overseas manufactured non name brand panel .
We strongly recommend that if you do this mod you go from 17" to 20". 19" is a OK but the 20" fills the entire screen and makes this upgrade really shine.
NOW available- New 20" bezels offered- These bezel fit into the factory slots. We have only tested pac-man , street fighter , space invaders the height of the bezel is 18.75 please double check your groove before ordering if you have gen 3. These should still work. With this option you won't be able to tilt your monitor
If we sell out please check back we add more kits as we complete orders. Current ship time on this item is between 1 & 14 days. If your selecting graphics please allow up to 4 extra days
This only includes the bezel UNLESS you check the box for the monitor mount & plexiglass
For install instruction video CLICK HERE
NEW OPTION ******* Bezel Graphics Not Installed
NO Refunds or exchanges on graphics. Bezel graphics are not installed unless you select installation, Bezel graphics can be a pain to install and are easy to mess up.
What monitors do we recommend? Most customers are using the ultra sharp Dell2007FPB monitors. These monitors can be purchased on Ebay or you may find some on amazon. You want to make sure the monitor you purchase will fit inside the Arcade1up. We don't recommend ANY widescreen models. Get the square old school monitors
You can also try facebook market place or craiglist. No monitor is included with this kit so you need to purchase one somewhere
Dell 2007fp monitor bezel is 16.25 x 12.25
SONY SDM - S205F = 16.25x12.25
Be sure double check measurements on your monitor screen before ordering. We have several different bezels make sure you order the correct one. We don't offer replacement bezels for wrong sizing.
If you need a vertical bezel ** Screen up and down ** we can do one for you select the custom bezel option and add in the notes vertical. Selecting this option adds an additional 2 to 3 weeks
if you do a 20" vertical bezel you may need to mount the bezel behind the marquee. Vertical kits have not been tested with gen 3 cabs
Measure the screen from side to side and top to bottom.
Customer images are on the left :
We don't offer returns or replacements for wrong sizes order
Bezel is made out of .25" MDF CNC . There's no mounting holes you you may need to Velcro bezel or use double side tape to the monitor bezel. This is just a frame
Product install videos :
Product coverage :
https://www.youtube.com/watch?v=BCP6Thlu4U0
https://www.youtube.com/watch?v=8RWlVtHLIlA
https://www.youtube.com/watch?v=c3ba7ir2JXk
https://www.youtube.com/watch?v=ijN4sOQRBiA
https://www.youtube.com/watch?v=D3JbHOPP4uw&t=686s
https://www.youtube.com/watch?v=8etra3cExpQ
https://www.youtube.com/watch?v=e7OzfCcRxcM
If you select graphics most of the graphic at the bottom will be under the control panel
Refunds & Damage Claims
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping & handling cost is non refundable.
No refunds or replacements on graphics.
Damage claims **** Please Read ****:
If you don't select shipping insurance and your item arrives damaged, It must be turned into the USPS inspection department for claim processing before a replacement is issued, This could take up to 30 days! We pack all items well but damage can happen from the lack of care through the postal service.
If you select shipping insurance you still need to turn the items in but instead of waiting for the claim to be settled we will send you a replacement after proof of return shipping.
Double check your monitor measurements before selecting bezel. If you don't see your size select the custom option. We only stock commonly used bezels there's an additional charge for custom bezel.
Horizontal = across this is similar to street fighter arcade1ups
Vertical = Up and down this is similar to a pac-man arcade1up
You can use any bezel you like, our kits work in all arcade1ups you just need to decide how you want to mount your monitor
No monitor is included with this
Arcade1up Big Buck Hunter 20" discontinuing soon
$99.00 - $139.00
Discontinuing soon
This product will no longer be offered soon. We are making room for T2 20" upgrade kits. We may bring this product back as a special cut but the price would increase. We suggest you order while you can.
*** NO CANCELLATIONS OFFERED *** Do not order if you plan to cancel! Orders Will Not Be Canceled After They Are Placed.
Most orders will ship within 7 days however you could be looking at 5 weeks if we get a big surge of orders from a sale.
We can do custom bezel cuts but we strongly recommend going with 20" for shooter mod. Anything less is really not worth the upgrade on a shooter cabinet
Orders without graphics installed will ship faster.
Install video done by CoolToy can be found here https://www.youtube.com/watch?v=eZXFZat-S0A
Kit will include
Wood Bezel
Plex
Monitor Mount + hardware
Additional options
Pump Shoot Sticker
Graphic Bezel
Graphic Install
NO monitor or actual machine included with purchase just bezel, monitor mount, plexiglass & hardware
Refunds & Damage Claims
For refunds after shipment you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 35% restocking fee for any returned merchandise. You have 14 days from delivery date. Shipping & handling cost is non refundable.
No refunds or replacements on graphics.
Damage claims **** Please Read ****:
If you don't select shipping insurance and your item arrives damaged, It must be turned into the USPS inspection department for claim processing before a replacement is issued, This could take up to 30 days! We pack all items well but damage can happen from the lack of care through the postal service.
If you select shipping insurance you still need to turn the items in but instead of waiting for the claim to be settled we will send you a replacement after proof of return shipping.
There's NO Cancellation offered do not order if you plan on canceling. We are cutting based off orders we get.
20 " Tulsa Arcades Monitor Upgrade Bezel Graphic Backordered
$24.99
Backordered 2 to 6 weeks
20" Bezel. You will need to apply the graphic to your bezel
We will add more options over time.
Keep in mind most of the graphic on the bottom will go under the control panel unless tilted
Returns :
There's no returns offered on graphics.
Arcade1up Monitor Mount + Hardware Restocking Soon
$29.99
$26.99
Limited availability currently offered
New monitor mount features adjustable slots.
Quickly add a after market monitor using this mount. Mount supports up to a 20" monitor and includes mounting hardware. Logo can be flipped and hidden if desired. You will need a bezel solution for most smaller monitors under 20" We recommend the bezel and plexiglass kit
What's Included
- Tulsa Arcades Monitor Mount Board CNC Cut
- 4 bolts for most monitors may need different ones but the 4 included will work with most
- 4 washers
- 8 Screws
- 4 L brackets
Does not include wood bezel or plexi glass. If you need the complete kit go here and check all the options at the bottom
https://www.tulsaarcades.com/store/p26/Arcade1upMonitorUpgradeKit.html#/
Shipping
Your item will normally ship next day but please allow up to 5 days for shipping. We been getting a lot of orders lately we are doing are best to fulfill orders quickly.
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Arcade1up CounterCade Control Panel Plexi
$23.99
Countercade plexy will ship with a brown paper mask on it. You will need to remove the film it's not cardboard.
Select the option below
Product coverage :
https://www.youtube.com/watch?v=F3JKzmkzwxA&t
https://www.youtube.com/watch?v=Vi48fAZQPYQ&t
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the delivery day. Shipping cost is not refundable
Arcade1up 16 button Control Panel. NEW Offering Backordered
$0.00
$34.99 - $49.99
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now back ordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 5 weeks. Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th.
NO CANCELLATIONS OFFERED
Panel now is defaulted to black melamine. This means no graphics are required black laminated wood. T mold is included. We offer the most affordable panel
This panel will work with gen 1 , 2 ,
- CNC cut.
- No painting required
If you want custom colored Arcadebuttons please visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the delivery date. Shipping cost is not refundable
Arcade1up Two Player Extended Panel NEW Offering Back Ordered
$74.99 - $78.99
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now back ordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks. Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th.
NEW - Control panel now comes in black No graphics required.
Please allow 2 to 6 weeks for shipping. Orders are made to order. We don't offer cancellations on orders without taking a 50% fee from total purchase.
These panels **** do not work with legacy cabs **** we will be working on extended panels for those in the coming weeks
T-mold now included in the starting price.
Panel is 25" long , Panel sits up higher since it's a box design, There's no bottom to this panel but most of the panel is covered up. This panel is tested with Gen 1 , Gen 2 & Some 3s if you have different arcades please be sure this will work as you might have a gap in the back if you are not doing a monitor upgrade.
Does not work will legacy line
- CNC cut.
- No painting required with t- mold and graphics.
- Track ball panels support Glen's Retro Trackball & Spinner. Coming Soon
T-mold color choices : Red , Black , Orange, Green, Yellow , pink ,
In the order notes put what color t mold you want and graphics :
If you want custom colored Arcadebuttons please visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is non refundable
Arcade1up CounterCade Control Panels Gen 1 Back ordered
$23.99 - $36.98
Control panels now include t mold option automictically. Panels only work with gen 1 countercades.
Gen 2 Here https://www.tulsaarcades.com/store/p244/CounterCadeControlPanelGen2.html#/
- CNC cut.
- No painting required with graphics.
Graphic options :
We can send you a template if requested and we will print your graphic for you, Or we have a few different options space invaders , dig dug , pac man , please leave notes with what graphic you want.
Product coverage :
https://www.youtube.com/watch?v=F3JKzmkzwxA&t
https://www.youtube.com/watch?v=Vi48fAZQPYQ&t
For custom colored arcade buttons visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Tulsa Arcades Mini Nintendo Switch Pinball Cabinet Back Ordered
$39.99 - $78.65
Only a few left!
Back ordered May to Mid June. No Cancellations offered
COMING SOON-
Nintendo Switch Pinball Cab BackBox. This will be a retro fit designed backbox that will work with all designs. With this backbox you will be able to fit the Switch OLED in. Backbox will be a static image only and have optional graphics for sides and playfield.
If you want graphics for the cab only and have already ordered the cab you can order the graphics here other wise select your graphic options below
https://www.tulsaarcades.com/store/p353/SwitchPinballgraphics.html#/
Checkout video reviews on this product from the links below
Facebook video link of a quick overview of the hidden USB C Option
https://www.facebook.com/TulsaArcades/videos/1660637004142398/
https://www.youtube.com/watch?v=EdVJSYjrKFc
https://www.youtube.com/watch?v=m6ZJMhb-o3k&t=327s
https://www.youtube.com/watch?v=2GMkNCjZlaE&t=40s
Parts list :
Buttons
Encoders :
Adapters :
Please be patient we have a TON of orders coming in and just small crew fulfilling orders.
We made a slight change on the base cabinet with the usb c cutout. Now the trim goes on top making it slightly cleaner and hiding the cutout, We like this design however if you really don't want a USB C cable coming out the side panel then you can get the hidden usb c option
Flat Pack Option - Selecting this option you will need wood glue , clamps this is a cheap DIY option for those wanting the cheapest method. We do not offer the hidden usb c with this option at this time
Bare cabinet - pre assembled without t mold or graphic installed.
Hidden USB C Cabinet - Includes usb c cable, does not include c to a adapters , no side cutouts for the right side panel so everything is hidden you still have the switch exhaust cutout on the left but over all this looks better. Cabinet is also pre assembled.
We are awaiting bulk shipments on USB c cables that work with this design so if you select this option you could be looking at 4 to 9 weeks on delivery. We do not offer cancelations on pre orders
Things you will need
USB C To A Adapter **required for all models ***
Nintendo Switch Encoders
Buttons thread type with rings ** Long Leaf buttons do not work **
USB C cable if selecting hidden then you won't need this.
Nintendo Switch Pinball Software From E shop
**** READ PLEASE ****
We do not offer cancelations at all on pre orders. We cut based off the amount of orders coming in and print graphics .
**** READ PLEASE ****
This design will not work with the Switch lite or oled. However the backbox should allow the oled to work.
If you select the flat pack option you will need wood glue & clamps this will be a DIY option and require assembly
**** READ PLEASE ****
We do not offer cancelations at all on pre orders. We cut based off the amount of orders coming in and print graphics .
**** READ PLEASE ****
Arcade1up X-Arcade Coin Door Panel Kit BACK ORDERED
$38.99
$32.99 - $49.99
Please allow 2 to 6 weeks for shipping. Blank black panels & panels without graphic installs normally ship out fast. If you select install you could be looking at 6 weeks
If you want graphics & install you need to check the two boxes in the graphic section. If your wanting a graphic design done you will still need to pay for the graphic as well $24.99 select any graphic below + the hire a design option
READ CAREFULLY -
When installing your panel it's best to loosen the screws around the coin door panel. Some arcade1ups MIGHT have some slight variances and require sanding of our panel prior to install. It just depends how the pocket of your groove on your Arcade1up was cut. Most users don't have to do any modifications.
Double coin door panels - Have been tested on gen 1 , gen 2, and should work on NBA Jam, TMNT however on Simpson's they will not work .
Kit includes:
- 1 black .25 coin door panel In stock
- 1 1/2 Arcade coin door ring support bare wood In stock
NO DOOR is included just the panel & support ring.
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping & handling cost is not refundable.
Sale prices will not be adjusted, follow us on Facebook for news about upcoming sales.
NO DOOR is included just the panel & support ring.
Replacment front panels Panel J
$19.99
CNC cut replacement Arcade1up front panels J Made from .25" black paneling, no painting required.
Orders normally ship same day but please allow up to 7 days for shipping & up to 10 days on big site sales.
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Arcade 1up Lit riser DIY You Install Everything
$59.99 - $65.99
***READ ****
This is a bare DIY kit. If You select this you will be installing graphics , t mold
On Sale LIMITED TIME Normally $65.99
This is the DIY riser kit. This kit is everything you need. You will need to install your own t mold and graphics. No led strip is included we recommend https://amzn.to/2yNIiL8
What's included
- Plexiglass
- Black Out Panel
- T Mold color of your choice with slot cut Pick red,green,black,yellow put in order notes
- Graphic of your choice
- Screws
Instructions:
- Remove the factory Arcade1up Panel
- Install graphics & t mold
- install led light on the factory riser best to clean the surface before applying
- screw in the front panel using the factory screws and use the feet from the factory panel if desired.
Tools required :
- screw driver
- blade for installing graphics
- hammer for installing t-mold
- scissors
There's no refunds or exchanges on graphics. Install at your own risk
Arcade1up 4 Player Control Panel Backordered
$129.99
$106.99
NEW black melamine. No graphics required.
Please allow up to 2 to 8 weeks for delivery there' a high demand for this product and we are currently backed up with 4 players .
Most 4 players will ship between 2 to 5 weeks.
*** READ ***
There's no cancelations offered. We cut these based off what come's in
***READ ***
What's included:
T mold now included with a lower price point.
- 4 Bolts
- 4 Player CNC cut control panel 37" Wide. A little over 2" tall Melamine
What Arcade1ups will this panel work with Any gen 1 100%.
Street Fighter
Final Fight
Rampage
Marvel with 20"
Space Invaders
Mortal Kombat gen 1
Galaga
Pac Man
Other panels work but if you don't have our 19" or 20" you may have a slight gap in the back roughly .25"
We have tested this on TMNT first gen , It works with a new J panel. We haven't tested this on Simpsons but don't see why it wouldn't work with a new J Panel. Order at your own risk on Simpsons
Graphics options are additional. You can also select to have graphics installed for additional fee or save money and DIY
Panel is open on the sides , middle section is covered
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the delivery date. Shipping & handling cost is not refundable
Simpsons Lit Riser Bigger Size Pre Order 2 to 7 weeks shipping
$122.00
$105.99
Sold out
Confirmed - This is a bigger riser this will not work with gen 1 , gen 2 , gen 3 cabs.
Shipping 2 to 7 weeks.
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
The blackout panel is a painted wood strip the fits in between the factory arcade1up panel. This panel helps keep the light from coming up.
This is a front panel replacement only not the entire riser. Your choice of Yellow Or Black t mold
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install Black Out Panel. Screws included.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Product Coverage :
https://www.youtube.com/watch?v=mzKYv3Oc9Qg&t=1s
https://www.youtube.com/watch?v=KuWpohEb19Y
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 40% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
Gift Card
$10.00 - $200.00
Holiday bonus - Buy a Tulsa Arcades gift card and get a FREE $10 store credit on any gift card between $10 - $25. Spend $50 or more and get a $15.00 store credit.
Credit will be valid from December 28th 2020 - December 28th 2021 and can not be used with gift card order.
Surprise someone special with a Gift Card! Gift Cards are delivered to the recipient by email and include instructions on how to redeem them at checkout. Our Gift Cards have no additional processing fees and never expire.
Credit will be valid from December 28th 2020 - December 28th 2021 and can not be used with gift card order.
Surprise someone special with a Gift Card! Gift Cards are delivered to the recipient by email and include instructions on how to redeem them at checkout. Our Gift Cards have no additional processing fees and never expire.
DIY Kit Parts USB Controller To PC 8 Ways Stick Control + LED Light Illuminated Push Buttons For Arcade Joystick
$57.99
Sold out
- Hole Size: Joystick - 24mm. Large Buttons-30mm. Small Buttons-24mm
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Ms Pac Man Lit Riser Backordered
$122.00
$99.00
Backorder status Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times however our graphic installer is not able to do installs till mid May / June
NO CANCELLATIONS OFFERED
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
The blackout panel is a painted wood strip the fits in between the factory arcade1up panel. This panel helps keep the light from coming up.
This is a front panel replacement only not the entire riser. Your choice of Red Or Black T-mold
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install Black Out Panel. Screws included.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
NBA Jam Lit Riser Front Panel
$99.00
$69.99
Sold out
This item is on sale. Due to current price shipping could take 2 to 6 weeks
Product Reviews :
https://youtu.be/ZSGJLxAAXmI?t=633
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
The blackout panel is a painted wood strip the fits in between the factory arcade1up panel. This panel helps keep the light from coming up.
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install Black Out Panel. Screws included.
- Install LED Lights of your choice.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
No cancellations
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/
Street Fighter Lit Riser Front Panel
$122.00
$95.99
Please allow 2 to 5 weeks for shipping.
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
The blackout panel is a painted wood strip the fits in between the factory arcade1up panel. This panel helps keep the light from coming up.
This is a front panel replacement only not the entire riser.
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws and dowels .
- Install Black Out Panel. Screws included.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Product Coverage :
https://www.youtube.com/watch?v=06GpT1CBty4&t=1142s
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Mortal Kombat Completed Riser Backordered
$122.00
$99.00
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now backordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks.
Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th. This will really delay orders unfortunately. Once we get moved we look to being able to improve shipping times.
NO CANCELLATIONS OFFERED
MK Riser does not work with MK Legacy Cab if you are interested in this riser please contact us
CNC cut 1/2" bare MDF with laminated graphics & backlit graphic
The blackout panel is a painted wood strip the fits in between the factory arcade1up panel. This panel helps keep the light from coming up.
This is a front panel replacement only not the entire riser. Your choice of Red Or Black T-mold
No led light strip is included. You can use any led strip we recommend the ones linked.
Instructions
- Remove the front riser panel and set aside screws.
- Install Black Out Panel. Screws included.
- Install LED Lights.
- Attach Lit Riser replacement panel, using screws you set aside in step 1.
Product Coverage :
https://www.youtube.com/watch?v=mzKYv3Oc9Qg&t=1s
https://www.youtube.com/watch?v=KuWpohEb19Y
Refunds & Sale Price
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged and packed well . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
We don't do sale adjustment pricing. Be sure to follow us on Facebook for information regarding upcoming sales
https://www.facebook.com/TulsaArcades/