Tulsa Arcades DIY Pre Built Arcade Kit Shell 4 to 8 weeks FREE Freight Shipping
Only a few left!
FREE USA FREIGHT SHIPPING INCLUDED
Now offering shell option without hardware for those that want the cheapest option possible
Features :
24" Monitor Support
Dado construction & pre built shell shipped on a pallet- You don't have to open this up out of the box and mess with wood screws , or janky junk camlocks putting this together
NO Camlocks or wood screws for shell construction. This type of construction is not something you can get in a flat pack kit. Each side panel has a .25" pocket and joining joint. Parts are glued using the highest quality glue. We use over 20 wood clamps on your shell insuring each joint is glued properly.
3/4 Melamine- Other kits use 1/2 wood we use material that is thicker like old school arcades. You won't find this type of wood with a Legends or 1up arcade
Lit Marquee. - Our marquee box has a no light bleed edge design. Plexy is recessed into a pocket.
T- mold groove. Shell comes pre cut for t-mold
Leveling Feet - Our base is pocketed for Arcade feet this insures your arcade is off the floor helping keep moisture , graphic curl damage from happening. Other flat pack kits don't offer this.
PC Fan cuts- Bottom panel is also cut for ventilation as well as the back panel. We worked hard to design away to allow good air flow into our cabinet design.
Lockable Back Door. Our back door features a dado set design. No hinges which cause sagging over time- This is something you will see with other flat pack kits the wood is too heavy and over time the door sags. Our door also features a lockable back door.
Wood Bezel- Shell includes a .25" wood bezel,
Bezel Plexglass - Removable plexy bezel for easy cleaning.
USA Freight shipping fully insured with liftgate service is included in the total price you pay.
Dimensions :
Control Panel 29.3419 x 10.6542
Side Panels 22.779 x 63.5606 add 2 inches with the leveling feet in height
Cab width roughly 23" wide
Kit includes the following with the completed option @ $999.99 :
Control panel with 8 buttons per player
Marquee Plexyglass
Bezel 24" wood.
Bezel Plexyglass
Leveling Feet
T-mold color choice
Lock
Monitor mount
Mounting hardware hinges, screws,
Marquee brackets
Pre built empty shell with t mold groove
Recommend Tools & items for completion
Mallet for t- mold installation
Screw driver for attaching monitor & control panel hinges & Arcade leveling feet.
Adjustable wrench for attaching lock to back door.
Graphic knife for graphic install.
Led Strip for marquee
Speakers Z313 is what we use and mount them in using brackets and hot glue
Speaker covers 4"
What's not included :
electronics
monitor
buttons
Joysticks
Speakers
Computer unless ordered
Graphics unless ordered
Control Panel Plexy
Additional options
Coin door cut
Coin door
Graphics
Please Allow 6 to 8 weeks for delivery
Arcade 1up Lit riser DIY You Install Everything
***READ ****
This is a bare DIY kit. If You select this you will be installing graphics , t mold
On Sale LIMITED TIME Normally $65.99
This is the DIY riser kit. This kit is everything you need. You will need to install your own t mold and graphics. No led strip is included we recommend https://amzn.to/2yNIiL8
What's included
- Plexiglass
- Black Out Panel
- T Mold color of your choice with slot cut Pick red,green,black,yellow put in order notes
- Graphic of your choice
- Screws
Instructions:
- Remove the factory Arcade1up Panel
- Install graphics & t mold
- install led light on the factory riser best to clean the surface before applying
- screw in the front panel using the factory screws and use the feet from the factory panel if desired.
Tools required :
- screw driver
- blade for installing graphics
- hammer for installing t-mold
- scissors
There's no refunds or exchanges on graphics. Install at your own risk
Arcade1up Control Panel Protective Cover NOT FOR STOCK Arcade1up
Does not work with Arcade1up stock panels. This only works with Tulsa Arcades panels
Select the control protective cover you wish to buy below.
Protective covers are made out of 1/8th Plexiglass.
Please allow up to 5 days for your order to ship.
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Arcade1up 4 Player Control Panel Backordered
Only a few left!
NEW black melamine. No graphics required.
Please allow up to 2 to 8 weeks for delivery there' a high demand for this product and we are currently backed up with 4 players .
Most 4 players will ship between 2 to 5 weeks.
*** READ ***
There's no cancelations offered. We cut these based off what come's in
***READ ***
What's included:
T mold now included with a lower price point.
- 4 Bolts
- 4 Player CNC cut control panel 37" Wide. A little over 2" tall Melamine
What Arcade1ups will this panel work with Any gen 1 100%.
Street Fighter
Final Fight
Rampage
Marvel with 20"
Space Invaders
Mortal Kombat gen 1
Galaga
Pac Man
Other panels work but if you don't have our 19" or 20" you may have a slight gap in the back roughly .25"
We have tested this on TMNT first gen , It works with a new J panel. We haven't tested this on Simpsons but don't see why it wouldn't work with a new J Panel. Order at your own risk on Simpsons
Graphics options are additional. You can also select to have graphics installed for additional fee or save money and DIY
Panel is open on the sides , middle section is covered
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the delivery date. Shipping & handling cost is not refundable
Arcade1up CounterCade Control Panels Gen 1 Back ordered
Control panels now include t mold option automictically. Panels only work with gen 1 countercades.
Gen 2 Here https://www.tulsaarcades.com/store/p244/CounterCadeControlPanelGen2.html#/
- CNC cut.
- No painting required with graphics.
Graphic options :
We can send you a template if requested and we will print your graphic for you, Or we have a few different options space invaders , dig dug , pac man , please leave notes with what graphic you want.
Product coverage :
https://www.youtube.com/watch?v=F3JKzmkzwxA&t
https://www.youtube.com/watch?v=Vi48fAZQPYQ&t
For custom colored arcade buttons visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
CounterCade Control Panel Graphic
Save on graphic with a purchase of a CounterCade Control Panel
Lamented graphic You will need to apply the graphic to your control panel
We will add more options over time.
Returns :
There's no returns offered on graphics or replacements
Arcade1up CounterCade Control Panel Plexi
Countercade plexy will ship with a brown paper mask on it. You will need to remove the film it's not cardboard.
Select the option below
Product coverage :
https://www.youtube.com/watch?v=F3JKzmkzwxA&t
https://www.youtube.com/watch?v=Vi48fAZQPYQ&t
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the delivery day. Shipping cost is not refundable
Arcade1up CounterCade Control Panels Gen 2
Now panels are standard with melamine wood. No graphics required
No cancelations offered - Everything is made to order based on what's received
- CNC cut.
- No painting required with graphics.
- T mold included
Due to the small spacing you need to relocate your speaker using these panels . We have tested the panels with Easyget buttons and joysticks. Our panels may not work for you if your using joysticks with wider mounting plates,
We are only offering two style panel cuts, No custom cut options on these.
Graphic options :
We can send you a template if requested and we will print your graphic for you, Or we have a few different options.
Product coverage :
https://www.youtube.com/watch?v=F3JKzmkzwxA&t
https://www.youtube.com/watch?v=Vi48fAZQPYQ&t
For custom colored arcade buttons visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
No cancelations offered - Everything is made to order based on what's received
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Arcade1up 16 button Control Panel. NEW Offering Backordered
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now back ordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 5 weeks. Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th.
NO CANCELLATIONS OFFERED
Panel now is defaulted to black melamine. This means no graphics are required black laminated wood. T mold is included. We offer the most affordable panel
This panel will work with gen 1 , 2 ,
- CNC cut.
- No painting required
If you want custom colored Arcadebuttons please visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the delivery date. Shipping cost is not refundable
Arcade1up Two Player Extended Panel NEW Offering Back Ordered
Only a few left!
Back order status effective 3/18/22 - Tulsa Arcades is in the process of moving, We are now back ordering anything ordered from this date.
If you place an order your product could arrive as late as May into June, Bezel kits and other items that don't have graphics should ship way before then roughly 2 to 6 weeks. Just be aware of this back order status before putting your order in. We DO NOT offer cancellations
Some of our major equipment is scheduled to be moved Friday 25th and will be down till March 30th.
NEW - Control panel now comes in black No graphics required.
Please allow 2 to 6 weeks for shipping. Orders are made to order. We don't offer cancellations on orders without taking a 50% fee from total purchase.
These panels **** do not work with legacy cabs **** we will be working on extended panels for those in the coming weeks
T-mold now included in the starting price.
Panel is 25" long , Panel sits up higher since it's a box design, There's no bottom to this panel but most of the panel is covered up. This panel is tested with Gen 1 , Gen 2 & Some 3s if you have different arcades please be sure this will work as you might have a gap in the back if you are not doing a monitor upgrade.
Does not work will legacy line
- CNC cut.
- No painting required with t- mold and graphics.
- Track ball panels support Glen's Retro Trackball & Spinner. Coming Soon
T-mold color choices : Red , Black , Orange, Green, Yellow , pink ,
In the order notes put what color t mold you want and graphics :
If you want custom colored Arcadebuttons please visit the link below
https://www.tulsaarcades.com/store/p95/Microswitchledbutton.html#/
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 30% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is non refundable
DIY Kit Parts USB Controller To PC 8 Ways Stick Control + LED Light Illuminated Push Buttons For Arcade Joystick
- Hole Size: Joystick - 24mm. Large Buttons-30mm. Small Buttons-24mm
Refunds
For refunds you must mail back the item to us in the original condition it was shipped to you undamaged . There's a 20% restocking fee for any returned merchandise. You have 14 days from the purchase date. Shipping cost is not refundable
Tulsa Arcades Mini Nintendo Switch Pinball Cabinet NEW Oled Back Ordered
Only a few left!
Cabinet now supports Nintendo Switch Oled - 06/10/22
Back ordered May to End of June. No Cancellations offered
If you want graphics for the cab only and have already ordered the cab you can order the graphics here other wise select your graphic options below
https://www.tulsaarcades.com/store/p353/SwitchPinballgraphics.html#/
Checkout video reviews on this product from the links below
Facebook video link of a quick overview of the hidden USB C Option
https://www.facebook.com/TulsaArcades/videos/1660637004142398/
https://www.youtube.com/watch?v=EdVJSYjrKFc
https://www.youtube.com/watch?v=m6ZJMhb-o3k&t=327s
https://www.youtube.com/watch?v=2GMkNCjZlaE&t=40s
Parts list :
Buttons
Encoders :
Adapters :
Please be patient we have a TON of orders coming in and just small crew fulfilling orders.
We made a slight change on the base cabinet with the usb c cutout. Now the trim goes on top making it slightly cleaner and hiding the cutout, We like this design however if you really don't want a USB C cable coming out the side panel then you can get the hidden usb c option
Flat Pack Option - Selecting this option you will need wood glue , clamps this is a cheap DIY option for those wanting the cheapest method. We do not offer the hidden usb c with this option at this time
Bare cabinet - pre assembled without t mold or graphic installed.
Hidden USB C Cabinet - Includes usb c cable, does not include c to a adapters , no side cutouts for the right side panel so everything is hidden you still have the switch exhaust cutout on the left but over all this looks better. Cabinet is also pre assembled.
Things you will need
USB C To A Adapter **required for all models ***
Nintendo Switch Encoders
Buttons thread type with rings ** Long Leaf buttons do not work **
USB C cable if selecting hidden then you won't need this.
Nintendo Switch Pinball Software From E shop
**** READ PLEASE ****
We do not offer cancelations at all on pre orders. We cut based off the amount of orders coming in and print graphics .
**** READ PLEASE ****
If you select the flat pack option you will need wood glue & clamps this will be a DIY option and require assembly
**** READ PLEASE ****
We do not offer cancelations at all on pre orders. We cut based off the amount of orders coming in and print graphics .
**** READ PLEASE ****